ارسال شده توسط : حسین صحرائی
تلفن: 09144100446
پرسش از آگهی دهنده
قیمت
تماس بگیرید (درخواست
قیمت)
درایور استپر موتور 4 آمپر TB6600
42,57,86type 2-phase 4-phase (4-wire line 6 line 8)
1, 9V-42V DC power supply;
2, H - bridge bipolar constant - current driving;
3, the maximum 4.0A eight selectable output current;
4, maximum 32 segment six Subdivision optional;
5, the input signal high-speed optical isolation;
6, the standard total positive single pulse interface;
7, offline maintenance function;
8, semi-enclosed chassis can be adapted to more stringent environment;
9, to provide energy-saving semi-automatic current lock function;
10, built-in temperature protection and overcurrent protection.
Description of terminal definitions
Signal input
⑴ the CP + : positive pulse signal input terminal.
⑵ CP- : pulse signal input negative terminal.
⑶ the DIR + : the motor is, reverse control of the positive terminal.
⑷ the DIR - : the motor is, reverse control negative terminal.
⑸ EN + : motor off control of the positive terminal.
⑹ EN- : motor off control of the negative terminal.
Motor winding connection:
⑴ A + : Connect the motor windings A + phase.
⑵ A- : Connect the motor windings A- phase.
⑶ B + : Connect the motor winding B + phase.
⑷ B- : Connect the motor winding B- phase.
Operating voltage connection:
⑴ the VCC : Positive DC power supply (Note: 10V < the VCC < 4 2V ).
⑵ the GND : DC power supply negative.
Signal input optocoupler isolation connection
There are two input signal interface connection: the user may need to use common anode or common cathode connection.
1 , common anode connection: respectively, the CP + , the DIR + , EN + is connected to the power supply control system, if the power supply is + 5V can be connected directly, if the power supply is greater than + 5V , shall be an additional external current limiting resistor R & lt , guaranteed to drive internal optical coupling provides 8-15mA drive current. Pulse input signal CP- access; In this case, the DIR - , EN- in low effective .
2 , common cathode connection: respectively CP- , the DIR -